This browser doesn't support JavaScript. Some features might not work properly.

VIP Bundle v4

USER MANUAL

v 4.0.0

Welcome

Plug & Mix V.I.P. Series - The Swiss Knife of Audio Plugins: Powerful, Versatile, and Effortlessly Simple.

In the dynamic world of music production, you need tools that inspire creativity and deliver professional sound without the hassle. That’s why we created the V.I.P. Series: 50 premium plugins crafted to help you stay focused on making music, not wrestling with complex controls.

Since 2011, the V.I.P. Series has been committed to giving you pro-quality sound in a streamlined, intuitive interface. With this update, we’ve supercharged our DSPs, added new features, and kept the workflow smooth. Just load a plugin, turn one or two knobs, and unleash your creativity.

The v4 is not compatible with sessions saved with the v3, but both versions can be installed and used simultaneously.

Presets saved from the v3 can be used in the v4.

Due to many DSP fixes, the v4 and the v3 can sound slightly different, especially at higher sample rate settings.

Ambiosoniq

Introduction

Model Ambio 101B

Ambiosoniq may look like a traditional 10-band graphic EQ, but it’s packed with extra functionality. Featuring an Ambience knob, this plugin adds remarkable depth and stereo width, bringing a spacious quality to your sound. Ideal for stereo tracks or effects returns, Ambiosoniq allows for precise frequency adjustments while enhancing the stereo field, making it a powerful tool for achieving both tonal balance and spatial enhancement.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

AMB-SONIQ

Disabled in Mono ▸ Mono

Adjusts the amount of added stereo ambience.

CLIPPER

Turns on the built-in output limiter to prevent peaking.

10-band EQ

Adjust the gain from -12 to +12dB of each individual bands.

The clipper switch was added in the v4. In the previous versions, the clipper was internal and always enabled.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

American Tweed

Introduction

Model DC US 4x10

Based on the legendary Fender Bassman, this amp-style distortion plugin brings you rich harmonics and warm drive. Shape your tone with Drive, Bass, Middle, and Treble knobs, then select from mic emulation modes for a realistic speaker sound. Use Boost for that extra edge, ideal for guitar tones with character and grit.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Controls the distortion amount of the amp section.

STEREO

Disabled in Mono ▸ Mono

Switches between mono and stereo processing.

BOOST

Adds an extra drive boost for even more distortion.

BASS

Adjusts the level of low frequencies.

MIDDLE

Adjusts the level of medium frequencies.

TREBLE

Adjusts the level of high frequencies.

CABINET selector

Choose the cabinet simulation mode:

OFF: no cabinet, DI out
OFF AXIS: cabinet with off-axis mic placement
ON AXIS: cabinet with on-axis mic placement

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

32 samples

Analoger

Introduction

Vintage Analog Saturator

Achieve the warmth and color of vintage tape machines with Analoger. This plugin brings both Tape and Tube saturation options, enhancing lows and highs with added richness. The Drive control shapes the intensity, while Mix lets you blend in the perfect level of analog warmth for a polished, classic sound.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Controls the amount of distortion to apply to the signal.

LOWS

Adjusts the level of low frequencies.

HIGHS

Adjusts the level of high frequencies.

MODE selector

Choose between Tube, Tape or a mixed Tube-Tape distortion character.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Basspeg

Introduction

Model SWT-10

A bass amp that brings the classic warmth and depth of the iconic Ampeg SVT to your DAW. Basspeg delivers punchy lows, smooth mids, and tailored highs, making it perfect for crafting a wide range of bass tones. Adjust the Deep contour for rich sub-bass, add a touch of Drive for natural tube distortion, and shape your tone with precision using the Bass, MidRange, and Treble controls. Choose from dynamic or condenser mic simulations to match your desired tone.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Controls the distortion amount of the amp section.

DEEP

When engaged, enhances the low end to add more fullness to the tone.

BRIGHT

When engaged, enhances the high end for more presence and clarity.

BASS

Adjusts the level of low frequencies.

MIDRANGE

Adjusts the level of medium frequencies.

TREBLE

Adjusts the level of high frequencies.

CABINET selector

Choose the cabinet simulation mode:

OFF: no cabinet, DI out
DYN: cabinet with dynamic miking
COND: cabinet with condensor miking

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

32 samples

Brightness

Introduction

Model DC-127S

Inspired by the classic Abbey Road studio tone-shaping gear, Brightness brings enhanced presence to your tracks. With Brightness and Clipper controls, adjust your highs smoothly without introducing harshness. Choose from three frequency settings to target the specific range you need, from subtle sparkle to a bright lift.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

CLIPPER

Turns on the built-in output limiter to prevent peaking.

BRIGHTNESS

Determines the amount of boost or attenuation to apply the the selected frequency in dB.

FREQUENCY selector

Select the frequency to boost or attenuate:

2.8 kHz
3.6 kHz
10 kHz

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

British Tone

Introduction

Model DC-UK 800

Channel the iconic sound of Marshall amps with British Tone. Adjust Drive, Bass, Middle, and Treble for the classic rock feel, then choose from speaker emulation options for added realism. Whether you’re after crunchy rhythm or soaring leads, British Tone delivers with ease and punch.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Controls the distortion amount of the amp section.

STEREO

Disabled in Mono ▸ Mono

Switches between mono and stereo processing.

BOOST

Adds an extra drive boost for even more distortion.

BASS

Adjusts the level of low frequencies.

MIDDLE

Adjusts the level of medium frequencies.

TREBLE

Adjusts the level of high frequencies.

CABINET selector

Choose the cabinet simulation mode:

OFF: no cabinet, DI out
OFF AXIS: cabinet with off-axis mic placement
ON AXIS: cabinet with on-axis mic placement

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

32 samples

California Tone

Introduction

Model DC Combo M5

Get the legendary sound of Mesa Boogie amps with California Tone. This amp-style plugin is perfect for powerful tones, providing Drive, Bass, Middle, and Treble adjustments. Choose from on- or off-axis mic simulations, and use Boost to push your sound further, giving guitars a punchy, responsive tone.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Controls the distortion amount of the amp section.

STEREO

Disabled in Mono ▸ Mono

Switches between mono and stereo processing.

BOOST

Adds an extra drive boost for even more distortion.

BASS

Adjusts the level of low frequencies.

MIDDLE

Adjusts the level of medium frequencies.

TREBLE

Adjusts the level of high frequencies.

CABINET selector

Choose the cabinet simulation mode:

OFF: no cabinet, DI out
OFF AXIS: cabinet with off-axis mic placement
ON AXIS: cabinet with on-axis mic placement

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

32 samples

Chorus Ensemble

Introduction

Model DC-CE-20

Create lush, immersive choruses with the Chorus Ensemble. With adjustable FX Level, Delay, Color, and Stereo Width, you can tailor the effect to anything from subtle thickening to full, dreamy textures. Select your chorus rate—Slow, Mellow, or Fast—to bring dimension to vocals, guitars, or synths.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

FX LEVEL

Ajust the amount of chorus effect to apply to the signal.

DELAY

Increases or decreases the timing of the chorus effect.

COLOR

Changes the tone of the chorus effect to be darker or brighter.

STEREO

Disabled in Mono ▸ Mono

Controls the stereo width of the effect.

RATE selector

Change the modulation rate of the chorus effect.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Clarisonix

Introduction

Model DC-H2000

Clarisonix is the ultimate low-end enhancer, perfect for thickening basslines and making kick drums hit harder. With Sub Level, Lo Focus, and Clarity controls, you can dial in the exact low-end presence you need. Three sub modes allow for tailored low-frequency boosts, delivering a powerful, punchy bass.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

SUB LEVEL

Controls the amount of sub frequencies emphasis.

SUB MODE selector

Choose between 3 sub modes. Each mode emphasizes a different sub frequency.

LO FOCUS

Determines the amount of low frequency boost.

CLARITY

Determines the amount of high frequency boost.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Classic Flanger

Introduction

Model DC-FL2012

This silky-smooth flanger lets you create everything from mild modulation to extreme sweeps. Classic Flanger offers adjustable Speed, Depth, Sync, and Feedback controls, along with three distinct modes for customized flanging. Use Mix to blend your effect seamlessly with the source.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

SPEED

Changes the modulation speed of the flanging effect.

SYNC

Synchronizes the speed parameter to the host BPM.

DEPTH

Changes the frequency range of the flanging sweep.

FEEDBACK

Adjusts the feedback of the flanging effect.

MODEL selector

Choose between Classic, M-Tron or Stomp flanger models.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

BPM sync

Any BPM

Classic Phaser

Introduction

Model DC-468

Bring warmth and dimension to your tracks with this vintage multi-stage phaser. Choose between 4, 6, or 8 Stage modes, and adjust Speed, Frequency Range, and Resonance for unique, swirling modulations. Sync to your host BPM for perfectly timed sweeps that breathe life into your sounds.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

SPEED

Changes the modulation speed of the phaser effect.

SYNC

Synchronizes the speed parameter to the host BPM.

FREQ RANGE

Adjusts the frequency range of the phaser sweep.

RESONANCE

Controls the resonance or feedback of the phaser. Use high resonance for a more intense and metallic effect.

STAGES selector

Choose between 4, 6 and 8 stages for the phaser. Use higher number of stages for a more pronounced and detailed effect.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

BPM sync

Any BPM

Cool-Vibe

Introduction

Model DC-UV1967

Modeled after the iconic Uni-Vibe, this effect adds vocal-like character to guitars, keyboards, and more. Customize your tone with Speed, Intensity, and Width. Three vibe modes—Sweet, Mellow, and Deep—let you craft a unique, atmospheric sound for any instrument.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

SPEED

Changes the modulation speed of the effect.

SYNC

Synchronizes the speed parameter to the host BPM.

INTENSITY

Adjusts the intensity of the effect.

WIDTH

Disabled in Mono ▸ Mono

Controls the stereo width of the effect.

MODE selector

Choose between Sweet, Mellow and Deep vibe modes.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

BPM sync

Any BPM

Degradiator

Introduction

Model DC-BitCrusher

Crush and distort your sound with the Degradiator. From subtle digital saturation to full-on destruction, this bit-crusher plugin provides controls for Crush, Bit Depth, Telephone Filter, and Down-Sample. Perfect for gritty, lo-fi textures that add vintage radio and crushed sonic flair.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

CRUSH

Controls the amount of distortion to add to the signal.

BIT DEPTH

Turn left for artificial bit depth reduction.

TELEPHONE

When enabled, processes the signal through a bandpass filter centered at the specified frequency.

DOWNSAMPLE

Turn left for artificial sample rate reduction.

CRUSH MODE selector

Choose between different distortion types:

CRUSH 1: Hard clipping
CRUSH 2: Soft clipping
CRUSH 3: Wavefolding

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Deluxe Tilt

Introduction

Tone Tilting

This unique EQ gives you an easy way to shift the tonal balance of your track. With the Tilting knob, adjust highs and lows simultaneously, and select Normal, Mellow, or Lush modes to control the Q factor. Deluxe-Tilt is ideal for quickly shaping the overall warmth or brightness of your mix.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

TILT

Controls how much the spectrum tilts around the center frequency.

Positive values will boost frequencies above the center frequency and cut frequencies below it
Negative values will cut frequencies above the center frequency and boost frequencies below it

COLOR selector

Determines the center frequency at which the tilt filter applies no gain or attenuation.

Frequencies below it are treated in the opposite way to those above.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Digital Plate

Introduction

Model DC-EMT240

Get the deep, rich texture of classic analog reverb with Digital Plate. Adjust Time, Mix, and Color for a warm, dimensional reverb that’s perfect for vocals and instruments. Simple yet versatile, this plate reverb adds depth and atmosphere to any track.

Controls

IN meter

Input signal peak level in dBFS.

VU meter / OUT meter

Output signal peak level in dBFS.

TIME

Set the decay time of the reverb in seconds.

MIX

Mix between dry and wet signals. 0% is full dry, 100% is full wet.

COLOR

Changes the tone of the reverb effect to be darker or brighter.

LEVEL

Controls the level of the reverb, before mixing with the dry signal.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Digital Reverb

Introduction

Model DC-2016

Modeled after the iconic Eventide Reverb 2016, this reverb plugin shines on drums and vocals alike. Choose from Small, Medium, and Large room sizes, and shape your tone with Decay Time, ER Level, Lows, and Highs controls for authentic, natural-sounding reverb.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DECAY TIME

Controls the decay length of the reverb in seconds.

E.R. LEVEL

Controls the level of the early reflections.

LOWS

Adjusts the amount of low frequencies in the reverb.

HIGHS

Adjusts the amount of high frequencies in the reverb.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Dimension 3D

Introduction

Model DC-320

Recreate the legendary Roland SDD-320 Dimension-D effect with Dimension 3D. This plugin delivers rich stereo detuning, with Detune controls and three chorus modes for added depth. Ideal for giving your tracks a sense of space and warmth.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DETUNE

Gives you less or more of the classic detune effect.

MODE selector

Choose between D1, D2 or D3 for 3 different levels of chorusing.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Distorted

Introduction

Model DC-D127

Add crunch and grit to your mix with Distorted. This versatile distortion plugin includes Drive, Low Cut, and Highs controls, along with a Mix knob for balancing the effect. Perfect for adding edge to guitars, vocals, or any track that needs a bit of attitude.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Adjusts the amount of distortion to add to the signal.

COLOR

Adjust the frequency color of the distortion.

Turn left for a darker, warmer sound, or right for brighter, sharper sound.

LOW CUT

Controls the cutoff frequency in Hz of the post-distorton low-cut filter.

HIGH CUT

Controls the cutoff frequency in kHz of the post-distorton high-cut filter.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

EchoFlex

Introduction

Model DC-Flex-1

Inspired by the Echoplex tape delay, Echoflex provides warm, vintage echo effects. Use Echo Time, Tone, Variation, and Sustain controls to create rhythmic delays and textures. With Sync and Ping-Pong modes, it’s easy to craft spacey echoes that elevate your sound.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

ECHO TIME

Sets the echo/delay time.

SYNC

Synchronizes the echo time parameter to the host BPM.

PING PONG

Disabled in Mono ▸ Mono

Switch between centered and ping-pong delay.

TONE

Determines the tone of the echoes. Turn left for darker or right for a brighter tone.

VARIATION

Adds slight variations of the echoes, reminiscent of tape-based delays.

SUSTAIN

Adjusts the decay time of the echoes.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

BPM sync

min. 60 BPM

Electro Q Tone

Introduction

Envelope Filter Tone

Achieve rich, funky filtering with Electro ‘Q’ Tone. This envelope-controlled filter plugin is perfect for adding movement to drums, bass, and guitars. Adjust the Cutoff, Resonance, and Envelope Attack/Decay to shape the filter's sweep, then dial in the Sweeper control for dramatic, resonant tones.

Controls

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter

Output signal peak level in dBFS.

FILTER TYPE

Controls the blend ratio between lowpass and bandpass filter types.

CUTOFF

Set the filter initial frequency.

RESONANCE

Adjusts the filter resonance.

ATTACK

Controls the time taken by the filter to sweep from Center frequency to Center + Amount.

DECAY

Controls how fast the filter frequency reverts to the initial value.

SWEEPER

Controls the filter's frequency sweep amount and direction when responding to the input signal:

Upwards with positive values
Downwards with negative values

A value of zero will keep the filter static.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Electro-Optical

Introduction

Model DC-202

This electro-optical compressor/limiter offers smooth dynamic control with adjustable Input Gain, Response, and Output Gain. Its soft-knee design ensures transparent compression, while an internal sidechain lets you shape your sound even further.

Controls

IN meter

Input signal peak level in dBFS.

OUT meter

Output signal (post output gain) peak level in dBFS.

GR meter

Displays the gain reduction applied by the compressor in dB.

INPUT GAIN

Controls the amount of signal sent to the compressor.

RESPONSE

Determines the speed at which the compressor reacts to the incoming signal.

OUTPUT GAIN

Controls the level of output for the compressor.

SOFT KNEE

When enabled, the compressor uses a soft knee to smooth out dynamic control. Hard knee is used when disabled.

SIDECHAIN HPF selector

When enabled, adds a high-pass filter to the sidechain, to reduce the compressor from reacting too much to the low end.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Gate Vador

Introduction

Model R2D2

Take control over noise and unwanted bleed with Gatevador. This easy-to-use gate and expander plugin lets you fine-tune the threshold, Decay time, and reduction amount with minimal setup. The Sensitivity and Activity LED give visual feedback, while the Selector offers various modes like gate and two levels of expansion, making it ideal for cleaning up your tracks without sacrificing natural sound.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

OUT meter

Output signal (post output gain) peak level in dBFS.

GR meter

Displays the gain reduction applied by the gate in dB.

SENSITIVITY

Controls the gate threshold. Incresing the sensitivity lowers the threshold.

DECAY

Controls the time for the gate to close after going below the threshold value.

REDUCTION

Sets the maximum applied gain reduction (in dB).

ACTIVITY meter

Illuminates when gating is active (when the gate is closed).

MODE selector

Choose between 3 gain reduction modes:

GATE: Infinite ratio
EXP 1: Expander with 5:1 ratio
EXP 2: Expander with 2:1 ratio

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Granulizer

Introduction

Model GRL-2020

The Granulizer plugin transforms audio into unique textures through granular processing. Split sounds into grains and modify their Density, Rate, and Feedback for dreamy, unpredictable effects. With Tune Pitch and Random Pitch controls, create everything from haunting drones to glitchy soundscapes.

Controls

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter

Output signal (post output gain) peak level in dBFS.

RATE

Controls grains repetition speed.

DENSITY

Duration control for the grains.

The higher duration the more overlapping grains generated, increasing sound density.

FEEDBACK

Controls amount of the output signal fed back to the input.

LPF

Low-pass filter cutoff control, which is inserted into the feedback path.

Simulates spectral loss in the feedback path.

PITCH

Grains transposition control.

RANDOM

Controls amount of random transposition added to each grain.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

LS Rotator

Introduction

Model HMD-122

Emulate the classic Leslie rotating speaker sound with LS-Rotator. With separate Bass and Treble rotors, as well as Drive and Spread controls, you can create a rotating, three-dimensional soundscape. Great for guitars, keyboards, and even vocals!

Controls

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter

Output signal (post output gain) peak level in dBFS.

SPEED

Speed control for the rotating speaker.

BASS

Speed control for the low frequency rotor.

TREBLE

Speed control for the high frequency rotor.

ACCEL

Controls the acceleration of the rotors when changing their rotation speed.

BAL

Controls the ratio between the output produced by the lower and upper rotors.

SPREAD

Disabled in Mono ▸ Mono

Controls the width of the stereo image.

DRIVE

Controls amount of saturation applied to the input sound.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Liquid Air-Q

Introduction

Model DC-Air-4

Liquid Air-Q breathes life into your tracks with its broad frequency control and signature Air Band. Adjust Low, Mid1, Mid2, and Air bands for a polished, clear sound that adds presence and transparency, perfect for vocals or any track that needs an extra sparkle.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

VU meter

Output signal (post output gain) peak level in dBFS.

LF FREQ

Adjusts the frequency of the Low Frequency band.

LF GAIN

Controls the boost or attenuation amount of the Low Frequency band.

LMF GAIN

Controls the boost or attenuation amount of the Low Mid Frequency band (830 Hz).

HMF GAIN

Controls the boost or attenuation amount of the High Mid Frequency band (2.2 kHz).

AIR FREQ

Adjusts the frequency of the Air band.

AIR GAIN

Controls the boost amount of the Air band.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Lo-Fi

Introduction

Model LF200

Grunge up your audio with Lo-Fi. This edgy plugin adds vintage digital grit, offering Bit Depth, Decimator, and Noise controls. The Stereo widening feature creates a dirty, expansive sound, ideal for adding character to bass, guitar, or drums.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain, pre mix) peak level in dBFS.

STEREO

Disabled in Mono ▸ Mono

Widens the stereo field of the effect.

BIT DEPTH

Reduces the bit depth from Normal to Destroy.

DECIMATOR

Down-samples the signal until it is completely obliterated.

NOISE

Adds noise and hiss to the signal.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

LoudBass

Introduction

Stereo Bass Booster

Make your low end pop with LoudBass. This stereo bass booster lets you select the frequency to enhance, and adjust Width for a solid mono signal or wide, spacious bass. Add power to kick drums, basslines, or any track that needs a robust bottom end.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

BOOST

Controls the boost applied to the low frequencies.

FREQ

Adjusts the center frequency of the boost.

WIDTH

Disabled in Mono ▸ Mono

Controls the stereo width of the low frequencies. Can both expand or narrow the bass image.

Has no effect on mono inputs.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Magic Queen

Introduction

Model DC-UK-30

Channel the vintage warmth of Vox amps with Magic Queen. Dial in Drive, Bass, Middle, and Treble to craft classic tones. Speaker emulation options add authenticity, letting you create bright, jangly guitar sounds that cut through the mix.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

DRIVE

Controls the distortion amount of the amp section.

STEREO

Disabled in Mono ▸ Mono

Switches between mono and stereo processing.

BOOST

Adds an extra drive boost for even more distortion.

BASS

Adjusts the level of low frequencies.

MIDDLE

Adjusts the level of medium frequencies.

TREBLE

Adjusts the level of high frequencies.

CABINET selector

Choose the cabinet simulation mode:

OFF: no cabinet, DI out
OFF AXIS: cabinet with off-axis mic placement
ON AXIS: cabinet with on-axis mic placement

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

32 samples

Monster Boost

Introduction

Model DC-DV666

Add bold harmonics and warmth to your mix with Monster Boost. This signal booster is perfect for enhancing drums, vocals, or even entire mixes. Booster, Warmth, Harmonics, and Details controls add punch and brilliance, giving tracks an impactful, polished sound.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

BOOSTER

Controls the amount of signal boost without overloading the audio.

WARMTH

Adjust low frequencies amount. Boost for a warmer sound.

HARMONICS

Adds harmonic distortion and punch.

DETAILS

Adds brilliance and high frequencies.

TONE selector

Choose between Natural, Lush and Mellow to control the overall tone.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Moogy Filter

Introduction

Model Mini-Filter

Bring classic analog filter sounds to your mix with Moogy Filter. Featuring Low-Pass, High-Pass, and Band-Pass modes, this plugin adds warmth and movement to any track. Use Saturation for crunchy tones and Envelope Depth for dynamic sweeps.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain, pre mix) peak level in dBFS.

CUTOFF

Controls the cutoff frequency of the filter.

SATURATION

Drives the filter and causes crunch distortion tones.

RESONANCE

Determines the strength of the filter at its cutoff.

ENV TRIGGER

Sets the speed of the filter envelope.

ENV DEPTH

Sets the depth of the filter envelope.

FILTER MODE

Choose from Low-Pass, High-Pass or Band-Pass filter types.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

6 samples

Multi-Tap Delay

Introduction

Echotec 5 Heads

Create rich, cascading echoes with Multi-Tap Delay. Set your delay rate with Speed and sync it to your project’s tempo. Position and Pan each delay tap for unique spatial effects, from robotic echoes to dreamy, ambient sounds. Ideal for vocals, guitars, and synths.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (pre output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

SYNC

Synchronizes the delay parameter to the host BPM.

DELAY

Controls the base timing of the echo.

COLOR

Dials in the brightness or darkness of the echo.

REPEAT

Controls the feedback of the effect.

POS

Sets the position of each individual delay tap, in 1/32nds of the base timing.

PAN

Disabled in Mono ▸ Mono

Sets the pan of each individual delay tap.

VOL

Sets the level of each individual delay tap.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Ob-La-Wah

Introduction

Auto Wah-Wah

Get funky with Ob-La-Wah, an auto wah-wah plugin that responds dynamically to your playing. Control Envelope Speed and Depth for a classic, psychedelic wah effect on guitars, keys, and more. The Filter Center adjusts the sweep range, adding a vibrant, vocal quality.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet signals. 0% is full dry, 100% is full wet.

VU meter / OUT meter

Output signal peak level in dBFS.

CENTER WAH

Controls the center frequency of the filter.

SPEED

Controls the response speed of the auto wah effect.

DEPTH

Controls the sweep range of the effect.

SENSITIVITY

Controls the envelope sensitivity. Used for tuning to match input sound level.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Octaplexer

Introduction

Made in USA

Add depth to single-note melodies with Octaplexer, a dual-octave generator. Mix original sounds with one and two octaves below for a thicker, fuller tone. Use Dry, -1 Oct, and -2 Oct controls to find the perfect balance, and apply Filter for timbre adjustments.

Controls

IN meter

Input signal peak level in dBFS.

VU meter / OUT meter

Output signal peak level in dBFS.

DIRECT

Adjusts the amount of dry signal in the output.

SUB -1 OCT

Controls the level of the generated signal one octave below.

SUB -2 OCT

Controls the level of the generated signal two octaves below.

FILTER

Adjusts the timbre of the generated signals.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Pitch Me

Introduction

Model H2999

Get vintage pitch-shifting with modern flexibility! Inspired by classic units like the H910, Pitch Me gives you independent pitch control for left and right channels, ideal for wide stereo effects or chorusing on vocals and instruments. With Left and Right pitch controls, a Link feature to sync both sides, and a Mix knob, you can blend dry and wet signals for thickened textures that pop in any mix.

Controls

IN gain

Gain to apply to the input signal in dB.

MIX

Mix between dry and wet signals. 0% is full dry, 100% is full wet.

VU meter

Output signal peak level in dBFS.

LEFT

Sets the pitch amount for the left channel, in cents of a semitone.

RIGHT

Disabled in Mono ▸ Mono

Sets the pitch amount for the right channel, in cents of a semitone.

STEREO selector

Disabled in Mono ▸ Mono

Choose a stereo link mode:

FREE: Both LEFT and RIGHT pitch amounts are set independently
LINK: RIGHT pitch follows the LEFT pitch
INV: RIGHT pitch is set to the opposite value of LEFT pitch

The LINK switch from the v3 has been replaced by the stereo modes FREE and INV in the v4.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Psycho Ring

Introduction

Model DC-Psych-01

This ring modulator plugin generates unique, harmonic-rich tones by mixing the input with an internal oscillator. Adjust Frequency, Sharpness, and Feedback to create anything from metallic textures to experimental soundscapes, perfect for adding an edge to drums or synths.

Controls

IN meter

Input signal peak level in dBFS.

VU meter / OUT meter

Output signal peak level in dBFS.

FREQUENCY

Adjusts the internal oscillator frequency in Hz.

SHARPNESS

Controls amount of the saturation inside the internal oscillator.

FEEDBACK

Controls the amount of FM feedback applied to modulator.

MIX

Mix between dry and wet signals. 0% is full dry, 100% is full wet.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Retro Compressor

Introduction

Model DC-2040

Add vintage compression with ease using Retro Compressor. With a simple, intuitive interface, you can dial in classic compression settings with Attack, Release, and Compression controls. Choose from R-2, R-4, and R-8 settings for more extreme compression.

Controls

TRIM

Gain to apply to the input signal in dB.

IN meter

Input signal (post trim) peak level in dBFS.

MAKE UP

Gain to apply to the output signal in dB.

OUT meter

Output signal (post make up gain) peak level in dBFS.

GR meter

Displays the gain reduction applied by the compressor in dB.

COMPRESSION

Determines the amount of gain reduction applied to the input signal.

ATTACK

Adjusts the compressor attack time.

RELEASE

Adjusts the compressor release time.

MIX

Mix between dry (post trim) and wet (post make up) signals. 0% is full dry, 100% is full wet.

RATIO selector

Select compression ratio:

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Retro Equalizer

Introduction

Model DC-2030

Modeled after the iconic API 550A, this equalizer offers precise control over low, mid, and high frequencies. Use Shelf and Bell Curve options to tailor the EQ’s effect, and adjust the In and Out levels for a balanced, polished sound.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

VU meter

Output signal (post output gain) peak level in dBFS.

LF

Select low frequency band to process in Hz.

LF GAIN

Gain to apply to low frequencies in dB.

LF MODE

Select low filter type:

Low Shelf
Bell

MF

Select middle frequency band to process in kHz.

MF GAIN

Select middle filter shape: sharp or broad

MF MODE

Select mid filter bell type:

Broad
Sharp

HF

Select high frequency band to process in kHz.

HF GAIN

Gain to apply to high frequencies in dB.

HF MODE

Select high filter type:

High Shelf
Bell

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Retro Filter

Introduction

Model DC-1424

The Retro Filter offers low-pass, band-pass, and high-pass filtering with a touch of analog warmth. With Presence, High Pass, and Low Pass adjustments, you can sculpt your sound with precision. Ideal for guitars, bass, vocals, or any sound needing vintage flavor.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

PRESENCE

Increase or decrease the presence of the signal.

CUTOFF

Determines the center frequency of the presence filter frequency band.

HIGH PASS

Adjust the cutoff frequency of the high pass filter, or disable it on the full left position.

LOW PASS

Adjust the cutoff frequency of the low pass filter, or disable it on the full right position.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Retro Limiter

Introduction

Model DC-2020

Control the dynamics of your mix with Retro Limiter. This simple yet effective limiter lets you choose between Limiter and Compression modes, adjusting Threshold, Release, and Trim to shape the sound. Perfect for maintaining punch and preventing peaks.

Controls

TRIM

Gain to apply to the input signal in dB.

IN meter

Input signal (post trim) peak level in dBFS.

MAKE UP

Gain to apply to the output signal in dB.

OUT meter

Output signal (post make up gain) peak level in dBFS.

GR meter

Displays the gain reduction applied by the limiter in dB.

LIMIT LEVEL

Determines the amount of gain reduction to apply to the signal.

RECOVERY

Determines the amount of time for the limiter to recover from loud input signals.

MIX

Mix between dry (post trim) and wet (post make up) signals. 0% is full dry, 100% is full wet.

MODE selector

Choose between 3 processing algorithms:

Limiter
Compressor 1
Compressor 2

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

S-Tractor

Introduction

Model DS-666

S-Tractor is a streamlined de-esser designed to tame harsh sibilance in vocals. With just Amount, Frequency, and Threshold controls, this plugin makes it simple to reduce those pesky “S” sounds without affecting the clarity of your vocal track. Engage SC Listen to precisely monitor the filtered frequencies, allowing for quick and accurate adjustments.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

OUT meter

Output signal (post output gain) peak level in dBFS.

GR meter

Displays the gain reduction applied by the de-esser in dB.

AMOUNT

Controls the amount of gain reduction applied when sibilances are detected.

FREQUENCY

Sets the center frequency for the side-chain detector circuit.

THRESHOLD

Sets the threshold for sibilance detection in dBFS.

SC LISTEN

Switch on to listen to the side-chain detector filter.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Screamer

Introduction

Model FLT-64

Add aggressive saturation and a signature “scream” to your tracks with Screamer. This hardcore distortion effect features Cutoff, Scream, and three Distortion Modes to produce high-energy sounds, especially effective on guitars, drums, or leads.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

BLENDER

Mix between dry (pre input gain) and wet (pre output gain) signals. 0 is full dry, 10 is full wet.

CUTOFF

Adjusts the frequency for the lowpass filter.

SCREAM

Controls the distortion amount of the internal saturation.

MODE selector

Select between three types of distortion.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

5 samples

Stereolizer

Introduction

Spatial Stereo Imaging

Widen your stereo image with Stereolizer. Use Width, Center, and Balance controls to enhance the stereo field, perfect for adding space and depth to your mix. Achieve broad, spacious imaging or a narrow, focused sound with this versatile plugin.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

STEREO WIDTH

Controls the stereo image width. Can be used for expanding or narrowing the stereo base.

The control has no effect on mono inputs.

CENTER

Adjusts the center of the entire stereo image.

BALANCE

Adjusts the relative level of left and right channels.

The control has no effect on mono inputs.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Stereo ▸ Stereo

Latency

None

Talking Tone

Introduction

Talking Box 1972

Simulate classic talk box effects with Talking Tone. Adjust Mouth, Pitch, and Envelope for vocal-like qualities, ideal for vocoder sounds or adding character to drums, guitars, and bass. Depth controls how dynamically the effect reacts to your input.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

AMOUNT

Controls the mixing amount between the dry (pre input gain) and the filtered signals.

MOUTH

Controls the filter tone, which blends between different vowels.

PITCH

Adjusts the frequency of the filter.

ENV SPEED

Controls the pitch modulation speed in response to the sound dynamics.

ENV DEPTH

Controls the pitch modulation amount in response to the sound dynamics.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Tone Stack

Introduction

Model TS-1970

Bring the power of classic amp tones to your tracks with Tone-Stack. Select from six Amp Types, then shape your sound with Drive, Bass, Middle, and Treble controls. Add Cabinet emulation for authentic, roaring amp tones perfect for guitar or bass.

Controls

IN meter

Input signal peak level in dBFS.

DRIVE

Controls the distortion amount of the amp section.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain) peak level in dBFS.

MODEL selector

Select from 6 different classic amp types.

When "OFF" is selected, the amp and the EQ are disabled.

CONTOUR

Switches on extra tone-shaping for added control.

CABINET

Switches on the cabinet simulator for authentic guitar amp mayhem.

BASS

Adjusts the level of low frequencies.

MIDDLE

Adjusts the level of medium frequencies.

TREBLE

Adjusts the level of high frequencies.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

32 samples

TransControl

Introduction

Transient Designer DC-9624

Enhance your track’s punch and presence with Transcontrol. Adjust Attack and Sustain for detailed transient shaping on drums, percussion, or any other sound needing extra impact. Output Gain lets you balance the effect within your mix.

Controls

IN meter

Input signal peak level in dBFS.

OUT meter

Output signal peak level in dBFS.

ACTIVITY meter

Displays the amount of gain increase and/or reduction applied by the processor in dB.

OUTPUT GAIN

Controls the output signal gain in dB.

ATTACK

Amplify or attenuate the transients of incoming signals.

SUSTAIN

Amplify or attenuate the sustain of incoming signals.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Tremolo Pan

Introduction

Model DC-5396

Add rhythmic movement to your mix with Tremolo Pan. Featuring Speed, Depth, Sync, and Width controls, this versatile effect lets you create modulated tremolo or wide, sweeping pans. Choose from Sine, Triangle, or Square waveforms for unique effects.

Controls

IN meter

Input signal peak level in dBFS.

VU meter / OUT meter

Output signal peak level in dBFS.

SPEED

Changes the modulation speed of the tremolo pan effect.

SYNC

Synchronizes the speed parameter to the host BPM.

DEPTH

Adjusts the intensity of the effect.

WIDTH

Disabled in Mono ▸ Mono

Controls the stereo width of the effect.

WAVE selector

Choose between Sine, Triangle and Square waveform shapes for the modulation.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

BPM sync

Any BPM

UltraMaxIt

Introduction

Model DC-L123

Achieve maximum loudness with Ultramaxit, a powerful maximizer and compressor plugin. Adjust Threshold and Release to control the dynamics, while Out level manages the final loudness. Ideal for adding punch to your master bus without unwanted distortion.

Controls

IN meter

Input signal peak level in dBFS.

OUT meter

Output signal peak level in dBFS.

GR meter

Displays the gain reduction applied by the limiter in dB after boost.

GAIN

Controls the amount of input level boost in dB.

RELEASE

Determines the speed at which the limiter recovers from loud input signals.

OUT CEILING

Controls the maximum output level of the plug-in.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

1.45 ms

Vibrator

Introduction

Model Magic Vibe

Add a unique, swirling movement to your mixes with the Vibrator plugin. Modeled after the iconic Uni-Vibe, this effect brings vintage character and depth to your instruments, widening the stereo field. Control the Speed, Intensity, and Width of the effect, while using Mix to blend it subtly with your source for just the right vibe.

Controls

IN gain

Gain to apply to the input signal in dB.

IN meter

Input signal (post input gain) peak level in dBFS.

MIX

Mix between dry and wet signals. 0% is full dry, 100% is full wet.

VU meter / OUT meter

Output signal (pre mix) peak level in dBFS.

SPEED

Sets the modulation rate.

SYNC

Synchronizes the speed parameter to the host BPM.

INTENSITY

Sets the pitch depth of the modulation.

WIDTH

Disabled in Mono ▸ Mono

Controls the stereo width of the effect.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Mono ▸ Stereo

Stereo ▸ Stereo

Latency

None

Vinylizer

Introduction

Model SCR-213

Recreate the warmth and nostalgia of vinyl records with Vinylizer. Add Noise, Dust, and Scratches for authentic vinyl crackles, perfect for adding vintage flavor to any track. Ideal for lofi or retro-inspired productions.

Controls

IN gain

Gain to apply to the input signal in dB.

OUT gain

Gain to apply to the output signal in dB.

VU meter

Output signal (post output gain) peak level in dBFS.

NOISE LEVEL

Controls the amount of vinyl noise added to the mix.

NOISE TONE

Adjusts the noise shape. Higher values will result in a brighter tone.

DUST LEVEL

Controls the level of the dust effect added to the mix.

DUST RATE

Controls the amount of dust on the emulated vinyl disk.

SCRATCH LEVEL

Controls the level of the scratches effect added to the mix.

SCRATCH RATE

Controls the amount of scratches on the emulated vinyl disk.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

Vowel Comb

Introduction

Model AEIOU

Give your sounds a talking, vocal-like quality with Vowel Comb. This unique filter plugin adds vowel overtones, letting you create rhythms that sing or growl. Use the Vowel, Shift, Envelope, and Resonance controls to shape expressive, organic sounds.

Controls

IN meter

Input signal peak level in dBFS.

MIX

Mix between dry and wet (post output gain) signals. 0% is full dry, 100% is full wet.

OUT gain

Gain to apply to the output signal in dB.

VU meter / OUT meter

Output signal (post output gain, pre mix) peak level in dBFS.

VOWEL

Dials in the vowel frequency and emits a vocal-like quality.

SHIFT

Changes the character of the tone from lower darker tones to brighter.

RESONANCE

Boosts the strength of the vowel frequency.

ENV SPEED

Controls the speed of the envelope's bite.

ENV DEPTH

Controls the depth of the envelope.

Signal chain

Specifications

Sample rates

44.1 kHz ▸ 384 kHz

Channel layouts

Mono ▸ Mono

Stereo ▸ Stereo

Latency

None

System Requirements

OS
macOS 10.13 or above
CPU
Intel 64 bit or Apple Silicon
Software
64 bit AU / VST / VST3 host
Pro Tools 11 or above
OS
Windows 7 or above, 64 bit
CPU
Intel/AMD 64 bit
Software
64 bit VST / VST3 compatible host
Pro Tools 11 or above
An internet connection is required to authorize the plug-in.

Common Plugivery Features

Interface basics

The following commands can be used on all controls:

Fine tune

⇧ Shift + drag

Reset

⌥ alt + click

Edit

Double click

Top bar

Main menu

Display the main menu: access to plug-in preferences, support, updates, etc.

An color dot notifies you when something requires your attention (updates, etc), click the menu to view.

Beta menu

Only visible on beta versions.

Quick access to the beta testing forum and build number.

Demo menu

Only visible in demo mode.

Quick access to product authorization and online store.

Preset manager

Displays the current preset name. The text will appear dimmed if the preset was modified.

Click on the name to display the preset manager.

Click on the arrows to navigate to the previous or next preset.

Workspace manager

Not available on all plug-ins.

Switch to a workspace (A/B) by clicking on the letter.

Right click on a workspace to copy or swap between workspaces.

Oversampling

Not available on all plug-ins.

Oversample the plug-in by the choosen factor. When set to "1x", no oversampling is applied.

The oversampling algorithm is not linear phase and only adds a few samples of latency.

BPM

Only available in standalone.

Sets the BPM to synchronize with when using BPM-synced parameters (LFO rates, delay times, etc).

Power switch

Click to power the plug-in on or off.

The bypass has the following characteristics:

Soft bypass: The plug-in is still processing when powered off but will just return the input audio
Smooth bypass: Powering on and off doesn't produce clicks and can be safely automated
Latency compensated: The output has the same latency wheither it's bypassed or not.

Preset manager

The preset manager can be open from the center top of the plug-in. It gives you access to the plug-in's factory presets and your own saved presets.

Save

Not available for factory presets.

Overwrite the loaded preset with the current plug-in state.

Only enabled if the current preset was modified since load.

Save As

Not available in demo mode.

Save the current plug-in state as new a preset file.

The preset must be saved in user data's "Presets" subdirectory to be recognized by the plug-in.

Refresh

Rescans the user presets folder. Use this button to refresh the menu in order to see changes made in the presets folder from the Finder/Explorer.

Reveal

Reveal the user presets folder in Finder/Explorer, or the current user preset if one is loaded.

Organize your own presets as you see fit in the Finder/Explorer. You can easily create subfolders, move, rename or delete presets.

When you are done, use the refresh button to display the changes in the menu.

Reset

Reset the plug-in to its initial state, setting each parameter back to its default value.

Factory Presets

The factory presets bundled with the plug-in. These cannot be overwritten.

User Presets

The presets that were saved in the user preset directory.

Main Menu

The main menu is available from the top left of the plug-in, and provides the following options:

Open User Manual

Open the current manual document.

Online Support

Open the support page for the current product.

Audio Settings

Only available in standalone.

Opens the audio settings panel to configure input/output devices, sample rate and buffer size.

Preferences

Opens the preferences panel.

Scale

Select the interface scaling, from 75% to 200%.

This setting applies to all plug-ins in VIP Bundle v4.

Skin

Not available in all plug-ins.

Select the interface skin.

Check for Updates

Check online if any update is available for the current product.

About

Show the about panel (plug-in details and credits).

Audio Settings

The audio settings panel is available from the main menu, on standalone applications only. It allows to configure the input/output devices, sample rate and buffer size.

Feedback Loop

Mute audio input to avoid feedback loop.

Output

Select the desired device for output.

Click the "Test" button to play a test sound through the selected device.

Input

Select the desired device for input.

The meter next to it displays the signal level through the selected device.

Active output channels

Select the channel(s) to use on the output device.

Active inputs channels

Select the channel(s) to use on the input device.

Sample rate

Select the desired sample rate.

Please note that this menu shows all sample rates supported by the device, the might differ from what the plug-in supports. Refer to the plug-in specifications about supported sample rates.

Audio buffer size

Select the desired buffer size.

The resulting latency is show in parentheses.

Preferences

General

These settings apply to all Plug and Mix plug-ins.

Control Value Tooltips

Change the position of the tooltip displaying the value of a control, relative to this control, or choose "None" to hide the tooltips.

Editing the value of a control using keyboard is not available when tooltips are disabled.

Show Help Tooltips

Display dynamic help on controls when the mouse is over them.

Metering

These settings apply to all plug-ins in VIP Bundle v4.

Digital Meter Speed

Not available in all plug-ins

Changes the response time of the bar graph (LED) level meters.

Slow: Gives an average level over a long period, useful for observing overall loudness. May miss short, loud peaks.

Normal: (default) A balanced setting that provides a good general view of both average and peak levels. Suitable for most recording or mixing tasks.

Fast: Responds quickly to level changes, great for detecting short, loud peaks to prevent clipping.

Analog Meter Behavior

Not available in all plug-ins

Change the behavior of mechanical (needle) level meters.

Peak: (default) Shows peak level in dBFS.

VU: Shows level in Volume Units with real VU meter ballistics, for a true vintage experience.

0 VU Calibration

Not available in all plug-ins

Only available when analog meter behavior is set to "VU". Set the 0 VU calibration in dBFS. Default value is -18 dBFS.

Licenses

Authorization Status

Display the current status of the plug-in.

Product

Only visible when authorized

The product authorized by the current license.

Email

Only visible when authorized

The email address associated with the current license.

Expiration

Only visible when authorized

The expiration date of the current license, if applies.

Authorize/Deauthorize

Authorize: Open the Authorization panel.

Deauthorize: Deauthorize the current license and free the seat.

Updates

These settings apply to all plug-ins in VIP Bundle v4.

Update Channel

Select which channel to use when checking for updates.

Release: Stable versions. Not available when running a beta version.

Public Beta: Includes stable version and Beta versions available to anyone. Use the Beta Forum link from the Beta menu to provide feedback when using Beta versions.

Check for Updates

Check online if any update is available for the current product.

Authorization

Demo limitations

The plug-in will run in demo mode until a valid serial number is entered. You can use the plug-in in demo mode without any time limit.

The demo mode has the following limitations:

Presets cannot be saved. You can still use the factory presets or another user's presets.
Session recall is disabled. If you saved a session with the plug-in in demo mode, it can still be recalled once the plug-in is authorized.

Authorization process

An internet connection is required to authorize the plug-in.

Insert an instance of the plug-in in a DAW.
Choose “Authorize” on the plug-in launch screen.

Enter the serial number provided in your order confirmation email, then click “Authorize”.
Some old serial numbers will require a (free) upgrade to authorize the newest versions of the product. Follow the instructions provided from the plug-in to proceed. A PV Connect account will be required (documented from the landing web page).
Once the authorization is successful, close the window and the plug-in will now be fully authorized.
If you experience any authorization issues, please contact support.

Deauthorization process

An internet connection is required to deauthorize the plug-in.

Your serial number comes with a limited number of 3 seats. To deauthorize a seat:

Insert an instance of the plug-in in a DAW.
Open the Preferences window from the main menu.
Go to the Licenses panel and click “Deauthorize”.

If you are not able to access the computer you want to deauthorize, please contact support.

Installation paths

Data

User data

Contains all user specific data: user presets, user plug-in settings, etc.

~/Documents/Plug and Mix/VIP Bundle v4/

%UserProfile%\Documents\Plug and Mix\VIP Bundle v4\

Factory data

Contains factory data: factory presets, manual, etc.

/Library/Application Support/Plug and Mix/VIP Bundle v4/

%ProgramData%\Plug and Mix\VIP Bundle v4\

Plugivery data

Contains data common to all Plugivery powered plug-ins.

/Users/Shared/Plugivery/

%Public%\Documents\Plugivery\

Plug-ins

AU

/Library/Audio/Plug-Ins/Components

VST

On Windows, custom VST directory can be set during installation. This is the default directory.

/Library/Audio/Plug-Ins/VST/Plug and Mix

%ProgramFiles%\VstPlugins\Plug and Mix

VST3

/Users/Shared/Plugivery/

%Public%\Documents\Plugivery\

AAX

/Library/Application Support/Avid/Audio/Plug-Ins/Plug and Mix

%ProgramFiles%\Common Files\Avid\Audio\Plug-Ins\Plug and Mix

Uninstaller

On Windows, you can uninstall from the "Apps & features" page in Windows settings.

On Mac, run the following application to uninstall the product.

/Applications/Plug and Mix/VIP Bundle v4/Uninstall

If you choose to remove your preferences and presets, the uninstaller will delete user data for current system user only. If you have other system user accounts, you will have to delete their data manually.

Uninstalling the product doesn't deauthorize the machine that still counts as a used license seat. See deauthorization process to deauthorize the machine and free the license seat before uninstall.

Acknowledgements

Portions of this software may utilize the following copyrighted material, the use of which is hereby acknowledged.

JSON for Modern C++

Botan

expected

Catch2

Eigen

farbot

libsoxr

NSIS

libpng

zlib

Roboto

FontAwesome

Gin

toml++

Apple, the Apple logo, macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Microsoft, Windows, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. VST is a trademark of Steinberg Media Technologies GmbH.

All product and company names are trademarks of their respective owners which are in no way associated or affiliated with Plugivery. These trademarks are provided for the sole purpose of identifying the specific products that were studied during Plugivery's sound model development.